Field assembly connector also called quick assembly connector, is a pre-polished, pre-assembled connector compatible with the standard LC/FC/SC/ST connector. In place of epoxy, can be installed within one minute. Without polishing, adhesives, or heating, this kind of connector makes field installation quickly and easily, eliminating the need for epoxy curing and hand polishing at the work site. It is designed for optical fiber termination especially in FTTH projects, directly in the end user site. It comes with assembly tool kits, It is easy and eminently portable.
all connectors tested for insertion loss and return loss before leaving the factory
|Applicable cable||3.1x2.0mm drop cable or 3.0/2.0mm cable|
|Operating time||About 10s (exclude fiber cut)|
|Insertion loss||≤0.25dB (1310nm &1550nm)|
-45°C ~ +85°C
On-line tensile strength (20N
Mechanical durability (500times
Drop-off test (height 4m,once per direction,totally 3 times)
1.All box is individual packed, with all accessories.
2.Master box is 5layer corrugated carton, which can ship directly or packed by non-fumigation pallet reinforced with plastic film wrapped and plastic strip.
3.We can print your own logo or brand on the master box if quantity is good,or make your own design.
E-MAIL : firstname.lastname@example.org